Push plate automatic feeding machine is an automated equipment mainly used to move materials from one position to another, especially suitable for material conveying on production lines. The following is an introduction to the push plate automatic feeding machine:
Basic Structure
Pushing plate: Pushing plate is a key component that drives material movement, usually made of sturdy materials such as steel or aluminum alloy, with a flat surface so that the material can slide smoothly on it.
Track: The track is a structure that supports and guides the movement of the push plate, usually made of metal material and installed on the base of the machine. The track can be straight or curved, designed according to actual needs.
Transmission system: The transmission system is used to drive and control the movement of the push plate, usually including motors, reducers, chains, and other parts. The motor provides power, and the reducer converts the high-speed rotation of the motor into the low-speed high torque motion required for the push plate. The chain transmits the driving force to the push plate.
Control system: The control system is used to monitor and control the operation of the push plate feeding machine, usually consisting of sensors, PLC (programmable logic controller), human-machine interface, and other parts. Sensors are used to detect the position and status of materials, PLC controls the movement of the push plate based on sensor signals, and the human-machine interface is used to operate and monitor the push plate feeding machine.
working principle
The working principle of the push plate feeding machine can be divided into the following steps:
• Ready: Before starting work, the materials to be processed need to be placed in the starting position, which can be done manually or automatically.
Material conveying: The push plate pushes materials along the track to the target position through the power of the transmission system.
application area
Push plate automatic feeding machine is widely used in industries such as machine tools, mining, metallurgy, etc., especially suitable for production lines that require continuous and efficient material transportation.
Structural characteristics
Tilt angle installation: The push plate is installed at a tilt angle to the horizontal plane of the frame, which helps with the automatic rolling and conveying of materials.
Servo motor control: Using servo motors and screw rotation to drive the push plate to move up and down, improving control accuracy and stability.
Mecanismo fixo: compreendendo pelo menos duas placas fixas, a placa de pressão é ligada de forma flexível no espaço entre as placas fixas adjacentes para garantir o movimento estável da placa de pressão.
parâmetro técnico
• Tensão de trabalho: geralmente 220V.
• Potência: Dependendo do modelo, a potência pode variar, como por exemplo 120W.
• Diâmetro de processamento: Adequado para materiais com diferentes gamas de diâmetro, como por exemplo Φ 2MM - Φ 45MM.
• Comprimento de processamento: Adequado para materiais com diferentes gamas de comprimento, como 70MM-400MM.
Operação e manutenção
A máquina de alimentação automática com placa de pressão é fácil de operar, segura e fiável. Todo o sistema está devidamente integrado no host, o que poupa mão-de-obra e reduz os custos de produção após a utilização. Em termos de manutenção, é necessário verificar regularmente o estado dos sensores, motores e sistemas de transmissão para garantir o normal funcionamento do equipamento.
Em resumo, a máquina de alimentação automática de placa de pressão desempenha um papel importante nas linhas de produção automatizadas devido à sua elevada eficiência, estabilidade e facilidade de operação.
